Othermill Pro

othermill-pro-square

TeelTech Othermill Milling Station

The Othermill Pro is a highly precise, compact, and easy-to-use desktop CNC mill for chip removal and milling / shaving away PCB and Epoxy to enable reading of memory chips from mobile devices.

Complete Kit includes
  • Othermill and standard 2 flute carbide 1/32 inch + 2 flute 1/64 endmill
  • 4 additional 4 flute flat 1/32 inch carbide endmills
  • Compact vacuum
  • Precision caliper

Standard items: Comes with an external power brick and power cord, a USB cord, an Accessory Kit with everything needed to operate your machine. Including wrenches, fixturing screws, an alignment jig, pulley belts, and end mills — as well as your very own first milling project, the Other Machine Co. “Hello, World!” Getting Started Kit.

Instructional videos and support during set-up and use for forensic milling.

Part No:
AP-OTHERMILL-PRO


 


Teel Technologies represents and resells the full Othermill line of products. If there is a model you don’t see on our site that you would like more information on, please let us know. We will be happy to provide details and pricing.

Specs

  • Interface: USB
  • File Input: Eagle BRD (.brd), Gerber RS-274X (.gtl and .grb), SVG (.svg)
  • G-Code (.nc and .tap)
  • Max Traverse Speed (Rapid) 60 in/min / 1,500 mm/min
  • Spindle Speed: 10,500–16,500 rpm
  • PCB Trace Clearance: 0.041 in / 1.03 mm
  • PCB Cut Speed: 60 in/min, 1500 mm/min
  • Power Reqs: 100–120 V AC, 4 A, 200–240 V AC, 2 A, 50/60 Hz
  • Consumption: 150w
  • Tool Holding: ER-11 Collet
  • Frame: 10.25 × 10 × 12.75 in / 260 × 254 × 324 mm
  • Working Volume: 5.5 × 4.5 × 1.6 in / 140 × 114 × 40.6 mm
  • Weight: 16.8 lbs, 7.62 kg

Windows Requirements

Operating System

Otherplan requires a 64-bit CPU and operating system. Otherplan will not run on a 32-bit version of Windows. We test Otherplan on Windows 7, Windows 8.1, and Windows 10.

CPU

Otherplan requires a 64-bit CPU. An Intel Core i3 or equivalent is required, and a Core i5 or equivalent is recommended.

Graphics

Otherplan requires a graphics driver that provides support for OpenGL 2.1 or higher. The largest source of incompatibility on Windows is with graphics drivers that provide incomplete or no support for OpenGL 2.1. We’ve found that older Intel graphics drivers tend to have buggy OpenGL support. Additionally, we’ve received reports that upgrading from an earlier version of Windows to Windows 10 can cause driver incompatibility. For best performance, use a computer with a dedicated graphics chipset.

Otherplan’s 3D Preview requires support for the following OpenGL extensions. Without these extensions, Otherplan will still function but will not show the 3D preview.

GL_EXT_frag_depth
GL_EXT_framebuffer_object

Memory

Otherplan requires 4GB of system RAM or higher. 8GB or higher is recommended.

Storage

Otherplan consumes less than 100MB of hard drive space. An SSD will provide higher performance.

Communications

A USB 2.0 port is required to connect to the Othermill.

iOS Requirements

Operating System

Otherplan requires Mac OS X 10.9 (Mavericks) or higher. New releases are tested on 10.10 (Yosemite), 10.11 (El Capitan), and 10.12 (Sierra).

CPU

Otherplan requires a 64-bit CPU. Apple switched its entire product line to 64-bit CPUs in 2008. An Intel Core i3 or equivalent is required, and a Core i5 or equivalent is recommended.

Graphics

Otherplan requires a graphics driver that provides support for OpenGL 2.1 or higher, and all Macs in the last 3 years have shipped with this support. For best performance, use a computer with a dedicated graphics chipset.

Otherplan’s 3D Preview requires support for the following OpenGL extensions. Without these extensions, Otherplan will still function but will not show the 3D preview.

  • GL_EXT_frag_depth
  • GL_EXT_framebuffer_object

 

Memory

Otherplan requires 4GB of system RAM or higher. 8GB or higher is recommended.

Storage

Otherplan consumes less than 100MB of hard drive space. An SSD will provide higher performance.

Communications

A USB 2.0 port is required to connect to the Othermill.


***A few older models available at a discounted rate. Contact Us for Pricing.