JNASE Hot Air Station
This is the smallest hot air station in the market.
It is perfect for reworking SMD components on surfaces with minimal separation.
It allows easy reworking of ultra-miniature SMD components (01005) under the microscope.
It enables flow regulation of temperatures and air at very low levels in order to avoid the expulsion/movement of adjoining components.
JBC offers three cartridge sizes with outlet diameters of 0.8, 1 and 1.2 mm, which are easily interchangeable.
The station includes a Pick & Place activated by pedal to position and remove components with high precision.
REFERENCES
- JNASE-1A 120 V
- JNASE-2A 230 V
PRODUCT COMPOSITION
- 1 JNASE Hot Air Station
- 1 SCH-A Cartridge Holder
- 1 J115-010 RESISTANCE.JNASE Ø1,0MM
- 1 0901546 Straight Needles for T260-A
- 1 0861660 Bent Needles for T-260A
- 1 0940163 Cups for T260-A Pick and Place
- 1 P-405 Pedal
- 1 T260-A Pick & Place
- 1 PH218 Thermocouple Type K
- 1 PH217 Kapton tape
SPECIFICATIONS
| Nominal Power | 70W |
| Temperature Selection | Room temp. / 150 – 450 °C (300 – 840 °F) |
| Cool Mode | T off. Used to blow air at room temperature |
| Ambient operating temp. | 10 – 50 ºC (50 – 122 ºF) |
| Air flow regulation | 0,15 – 1 SLPM |
| Vacuum | 53% / 397 mmHg / 15,6 inHg |
| Communication connectors |
USB-A / USB-B RJ12 for RS232 Pedal / Stand |
| Control Unit | 170 x 180 x 110 mm / 1,35 kg 6.7 x 7.1 x 4.3 in / 2.96 lb |
| Package | 370 x 370 x 200 mm / 4,06 kg 14.6 x 14.6 x 7.9 in / 8.95 lb |